SLIDEWHIZZER SW-04, Assembly Instructions Manual

Page: 5 / 11

1 - 6. Bolt the edge of Top slide chute (J) and the Middle slide chute (V)
by using bolt (M) x 2. (Figure 4)
Page 5 of 11
Step 2 Assembling the Middle slide chute and
the Bottom slide chute
2 - 1. Lay out the Middle slide chute (V) and the Bottom slide chute (W). (Figure 1)
2 - 2. Connect the Middle slide chute (V) and the Bottom slide chute (W) by embedding
tongue-and-groove joint firmly. (Figure 2)
(Figure 2)
(V) (W)
(Figure 1: Front view of the Middle
and Bottom slide chute)
NOTE: Please ensure that the slide pieces connect without any gaps.
2 - 3. Turn Figure 2 to the back side and fix Middle slide chute (V) and
Bottom slide chute (W) by using the steel plate (X) x 1 and bolt (Q) x 2.
(Figure 3)
(Figure 4)