3.7 One-touch memory
•
Store a number In one-touch memory
Enter the number you want to store at first, then press and hold the desired location
button (
M1
~
M10
) until the LCD shows
SAVE OK
.
NOTE:
If you want to update the stored number, you need to store a new number to
replace the old one.
•
Review the number in one-touch memory
In the state of on-hook, press the location button (
M1
~
M10
) once, the LCD will
show the matching number.
NOTE:
If you haven't store any number in one-touch memory and you press the
location button, the caption
MEMORY IS EMPTY
will be shown on LCD.
•
Dial a number from the one-touch memory
Lift the handset or press the loudspeaker button, then press the location button
(
M1
~
M10
) to dial the number.
•
Copy the CID or last 15 dialed or phone book number to M1~M10
*When the desired number shows on the LCD, press and hold the location button
(
M1
~
M10
) until the LCD shows
SAVE OK
, now the number has been stored in the
memory.
3.8 Two-touch memory
•
Store a number in two-touch memory
You can store 10 numbers to the two-touch memory in either on-hook or off-hook
state.
1. Press the
STORE
button and the LCD shows '
-->
'.
2. Enter the telephone number you want to store.
3. Press the
STORE
button again and the LCD shows "
-->
'.
4. Enter desired location number (
0
-
9
) and the LCD shows
SAVE OK
.
•
Dial a number from the two-touch memory
1. Lift the handset or press the speakerphone button.
2. Press the
AUTO
button followed by a desired location button (0-9) to dial
out the matching number.
•
Review the number in one-touch memory
In the state of on-hook, press the
AUTO
the location button
, the matching
stored number will show on the LCD.