3
Function buttons
3.1 Ringer Volume Adjustement
In the state of on-hook, you can press the
VOL+
or
VOL-
button to adjust the desired
ringer volume (there are 4 levels for selecting). The LCD will show the current setting,
e.g.:
RING VOLUME 2
.
3.2 Redial Function
Lift the handset or press the speakerphone button. Then press the
RD/P
button to redial
the last dialed number.
3.3 Speakerphone Function
To switch your call to speakerphone, press the speakerphone button and hang-up the
handset. To revert back, just pick up the handset. In speakerphone mode, you can dial the
number and receive the call, also you can answer the call.
3.4 Flash Function
Press the
FLASH
button to terminate a call and institute a dialing tone for another call or
to get another call from
Call Waiting
(a special telephone service).
NOTE:
If you do not have any special telephone service, such as
Call Waiting
, pressing
the
FLASH
button during a call may disconnect your current corversation.
3.5 Mute Function
If you wish to speak privately to someone else in the room without your caller
overhearing, press the
MUTE
button once then the LCD will display
MUTE
. To resume
normal corversation, just press the
MUTE
button again.
3.6 Pause Function
Allows you to insert a temporary pause during dialing sequence. For example, dialing an
international number (e.g.: 011-886-22-795-1234), some telephone company systems will
not register the entire number entry without a pause between the prefix numbers. You
may have to dial 011 -
RD/P
, dial 886 -
RD/P
. This allows adequate time for the phone
number to register with the telephone company's system and complete the call.