Technical Specifications
Product Type:
530
Intended use:
See page 3.
Classification:
• Internally powered equipment, Type BF applied parts.
• This product is intended for continuous operation. i.e. operation in normal use, for an unlimited period of time, without
the specified limits of temperature being exceeded.
• This product is not suitable for use in an oxygen-rich environment.
• This product is not suitable for sterilisation.
• Protected against ingress of water, as per IP22.
Waveform:
Symmetrical bi-phasic pulse waveform when measured into a resistive load. Constant current controlled.
Note:
• The signal gradually increases to a peak intensity level at the start of the contraction phase (i.e. ramp up) and
gradually decreases to nothing at the start of the relaxation phase (i.e. ramp down). When an electrode contact
problem is detected, the signal ceases.
Environmental Specifications:
Operating Range:
Temperature: 5 to 35˚C / 41 to 95˚F
Humidity: 15 to 93 % RH (non condensing)
Atmospheric Pressure: 70 to 106kPa
Transport & Storage Range:
Temperature: -25 to +70˚ C / -13 to +158˚F
Humidity: 10 to 93% RH (non condensing)
Atmospheric Pressure: 50-106kPa
The Output Frequency indicates the number of pulses per second transmitted by the controller. This is measured in hertz,
which is indicated by Hz”.
Output (RMSA) means the maximum output root mean square current for each channel.
Output (RMSV) means the maximum output root mean square voltage for each channel.
The controller contains 1 x 3.7 V Nominal Lithium Ion Polymer Battery.
17
English
Pulse IM Rev E.qxp_ML Book 27/06/2019 12:24 Page 18
