charge your unit
1.
Insert your charger into a socket and then connect it to your unit. It will take approxi-
mately 2-3 hours to fully charge the battery. Your unit is fully charged when all three
sections of the battery icon are full. The battery icon will flash when the battery is low
and needs to be recharged.
2.
Always diconnect your unit from the charger when the battery is fully charged.
garment set-up
3.
Connect the unit to the garments. The unit and garments must be connected
properly for your
ARM TONER
to work. “Click” the unit connector into the garment
connector.
4.
Place the garments with the four silver studs facing towards you. Remove the
adhesive GelPads from their pack. You will notice that one side of each GelPad has
a grid pattern on it while the other side is plain black.
5.
Remove the covers from the
patterned
side of the four GelPads. Place the
patterned
side of the GelPads over the silver studs and within the white lines.
6.
Remove the covers from the
black
side of all four GelPads. Do not throw these away
as you will need to put them back onto the GelPads at the end of your session.
Note:
You should only use
SLENDERTONE
GelPads as other kinds may reduce the effectiveness
of the exercise.
3
6
4
1
2
5
7
www.slendertone.com
English
US Male Arms IM 3L_Layout 1 04/05/2011 15:41 Page 9