6
6572
2
2020
-
SH user manual
MG_0148
KEY:
1. Hydraulic Motor
2. Mounting Plate
3. Motor bracket
4. Flexible coupling
5. Gear Leg
6. Propeller
7. Anode
8. Drive pin
9. Washer
10. Lock Nut
11. Fastening Screw for anode
12. Oil drain screw
13. Shaft Key
14. Anode pins
15. Locking Washer
SH
* 100
* 160
* 240
SH
* 320
SH
* 420
* 550
SH
* 700
* 1000
* 1400
11
13
11
11
10
10
10
9
9
9
8
8
7
7
7
7
7
7
6
6
6
6
6
6
5
5
5
5
5
5
4
4
4
3
3
3
2
2
2
1
1
1
11
14
12
12
13
10
15
7
7
6
6
5
5
4
3
2
1
MC_0362
Maintenance
EN
As a part of the seasonal service of your Thruster before every season, always check that:
In Water/ Out of the Water
• The area around the thruster inside the boat is clean and dry. Ensure there are no signs of water or oil leaks.
•
All electrical connections are clean and fastened fi rmly.
•
Ensure that your batteries are in good condition.
Out of Water
• Check the propeller(s) or tunnel for any damage for example impact damage.
• The propeller(s) is fastened securely to the gear leg.
• Check all components of thruster are fastened securely.
• Clean the tunnel and gear leg from marine growth.
• Paint the propeller and gear leg with anti-fouling before every season to keep it clean from sea growth.
(NB: Never paint the anode, rubber seals
or propeller shaft. Ensure paint does not enter the space between the propeller and the gear leg.)
• Change the anode before every season, or when half the anode has eroded. Always use a sealant or thread glue on the securing screw to ensure
that it does not fall off .
• Ensure propellers are attached correctly.
(NB: Counter rotating models use a left hand/ right hand propeller.)
• If an external oil tank is installed with your model, ensure the oil level remains the same.
!
Please refer to the graphic for special considerations relating to your model
!
