background image

2

6572

2

2020

-

SH user manual

DECLARATION OF CONFORMITY

Sleipner Motor AS

P.O. Box 519, Arne Svendsensgt. 6-8

N-1612 Fredrikstad, Norway 

Declare that this product with accompanying standard control systems complies with 

the essential health and safety requirements according to:

DIRECTIVE 2013/53/EU

DIRECTIVE 2014/30/EU

DIRECTIVE 2014/35/EU

MC_0020

Important User Considerations and Precautions

 ................. 3

User Manual

Thruster Operation .................................................................... 4

Control Panel ............................................................................. 5

Maintenance ........................................................................  6 - 7

Troubleshooting ......................................................................... 8

Checklist .................................................................................... 8

Spare Parts................................................................................ 9

 

Contents

EN

MC_0048

Important Thruster User Considerations and Precautions

EN

IMPORTANT 

Failure to follow the Considerations and precautions can cause serious injury / damage and will render all warranty given by Sleipner 

Motor AS VOID.

Never use thrusters when close to objects/ persons or pets in the water. The thruster will draw objects into the tunnel and

the rotating propellers. This will cause serious injuries and damage the thruster.

•  Always turn the control device/panel off  when the thruster is not in use or when leaving the boat.

•  When leaving the boat always turn off  the main power switch for the thruster.

•  Never use thrusters out of water.

•  If the thruster stops giving thrust while running, there is possibly a problem in the drive system. You must immediately stop running the thruster and  

   turn it off . Running the thruster for more than a few seconds without resistance from the propeller can cause serious damage to the thruster.

•  If the performance of the thruster is reduced check the hydraulic system or check the tunnel for marine growth. 

•  If two panels are operated with confl icting directions at the same time the thruster will not run. If both are operated in the same direction, the thruster  

   will run in this direction.

•  If you notice any faults with the thruster switch it off  to avoid further damage.

•  It is the owner/ captain/ other responsible parties full responsibility to assess the risk of any unexpected incidents on the vessel. If the thruster stops  

  giving thrust for some reason while manoeuvring you must have considered a plan on how to avoid damage to persons or other objects.

 

•  The primary purpose of the thruster is to manoeuvre/ dock the vessel. Expect reduced performance at higher speeds.

Products 

SH1000/513-BA45 - SH1000 Tunnel thruster, Ø513mm 

SH100/185T-U06 - SH100 Tunnel thruster, U06 

SH100/185T-U10 - SH100 Tunnel thruster, U10 

SH160/215T-U14 - SH160 Tunnel thruster, U14 

SH160/215T-U06 - SH160 Tunnel thruster, U06 

SH240/250TC-U08 - SH240 Tunnel thruster, U08 

SH240/250TC-U10 - SH240 Tunnel thruster, U10 

SH240/250TC-U19 - SH240 Tunnel thruster, U19 

SH320/300TC-U16 - SH320 Tunnel thruster, U16 

SH320/300TC-U19 - SH320 Tunnel thruster, U19 [Archived] 

SH320/300TC-U08 - SH320 Tunnel thruster, U8 

SH320/300TC-U23 - SH320 Tunnel thruster, U23 

SH320/300TC-U14 - SH320 Tunnel thruster, U14 

SH320/300TC-U11 - SH320 Tunnel thruster, U11 

SH320/300TC-BA19 - SH320 Tunnel thruster, BA19 

SH320/300TC-BA16 - SH320 Tunnel thruster, BA16 

SH420/386TC-U37 - SH420 Tunnel thruster, U37 

SH420/386TC-BA40 - SH420 Tunnel thruster, BA40 

SH420/386TC-BA32 - SH420 Tunnel thruster, BA32 

SH420/386TC-U33 - SH420 Tunnel thruster, U33 

SH420/386TC-U26 - SH420 Tunnel thruster, U26 

SH420/386TC-BA40-S - SH420 Tunnel thruster, BA40 

SH420/386TC-U29 - SH420 Tunnel thruster, U29 

SH550/BA40-S - Hydraulikk thruster, >550kg 

SH550/386TC-P52 - SH550 Tunnel thruster, P52 

SH550/386TC-BA60 - SH550 Tunnel thruster, BA60 

SH550/386TC-BA32 - SH550 Tunnel thruster, BA32 

SH550/386TC-BA40 - SH550 Tunnel thruster, BA40 

SH550/386TC-U50 - *Hydraulikk thruster >550-U50 

SH550/386TC-U33 - SH550 Tunnel thruster, U33 

SH550/386TC-U37 - SH550 Tunnel thruster, U37 

SH550/386TC-BA40-S - SH550 Tunnel thruster, BA40 

SH550/386TC-BA75 - SH550 Tunnel thruster, BA75 

SH550/386TC-G45 - SH550 Tunnel thruster, G45 

SH700/412-BA60 - SH700 Tunnel thruster, BA60 

SH700/412-BA75 - SH700 Tunnel thruster, BA75 

SH700/412-BA45 - SH700 Tunnel thruster, BA45 

SH700/412-BA56 - SH700 Tunnel thruster, BA56 [Archived] 

SH1000/513-BA110 - * BRUK SH1000/513-BA110D13 

SH1000/513-G80 - SH1000 Tunnel thruster, G80 

SH1000/513-BA125 - SH1000 Tunnel thruster, BA125 

SH1000/513-G75 - SH1000 Tunnel thruster, G75 

SH1000/513-BA80 - SH1000 Tunnel thruster, BA80 

SH1000/513-G70 - SH1000 Tunnel thruster, G70 

SH1000/513-BA60 - SH1000 Tunnel thruster, BA60 

SH1000/513-BA110D13 - SH1000 Tunnel thruster, BA110 

SH1400/610-BA160 - SH1400 Tunnel thruster, BA160 

SH1400/610-BA125 - SH1400 Tunnel thruster, BA125 

SH1400/610-BA80 - SH1400 Tunnel thruster, BA80 

SH1400/610-BA180 - SH1400 Tunnel thruster, BA180 

SH1400/610-BA110 - SH1400 Tunnel thruster, BA110 

SH1400/610-BA150 - SH1400 Tunnel thruster, BA150 [Archived] 

SH1400/610-BA080 - SH1400 Tunnel thruster, BA80 

SH100/185T-U11 - SH100 Tunnel thruster, U11 

SH160/215T-U08 - SH160 Tunnel thruster, U08 [Archived] 

SH1000/513-BA75 - SH1000 Tunnel thruster, BA75 

SH160/215T-U11 - SH160 Tunnel thruster, U11 [Archived] 

SH320/300TC-U10 - SH320 Tunnel thruster, U10 

SH550/386TC-BA56 - SH550 Tunnel thruster, BA56 

SH1000/513-BA90 - SH1000 Tunnel thruster, BA90 

SH100/185T-U08 - SH100 Tunnel thruster, U08 [Archived] 

SH160/215T-U10 - SH160 Tunnel thruster, U10 

SH240/250TC-U14 - SH240 Tunnel thruster, U14 

SH240/250TC-U16 - SH240 Tunnel thruster, U16 

SH240/250TC-U11 - SH240 Tunnel thruster, U11 
SH550/386TC-BA45 - SH550 Tunnel thruster, BA45

Summary of Contents for Side-Power SH Series













Reviews: