Chapter 1:
Quick Start Guide
EarthPulse
TM
v.4.
7
Contents;
•
Sleep on Command
TM
v.4.
7
digital con-
troller
•
Modular Electromagnet (shipped with
CROSS-POLARIZING ring attached)
•
100 - 240 volts AC to 7 volt DC power
supply
•
local plug adapter
•
convenient padded carrying-case
Electromagnet CROSS-POLARIZING ring
should be removed prior to use. CROSS-
POLARIZING RING IS FOR LOCAL-
APPLICATION
ONLY
Magnet will now look like photo be
low.
PRIOR TO Turning Unit On
: Please find
a plug near your couch or bed as you will
set the device now for your 1 hour initia-
tion session.
You should find this relaxing
and enjoyable. You may set timer for as
long as you would like.
1) Plug the POWER-SUPPLY into wall
outlet (100 - 240 volt AC). Use international
plug adapter if required.
2) Plug power-supply cord into the large
jack on the right-rear of control unit.
3) Plug ELECTROMAGNET-CORD firmly
into small jack on left-rear of control unit.
4) Powering-On EarthPulse
TM
:
depress
ON / OFF button and device boots to the
start screen MODE-SLEEP 1 as shown be-
low.
If you make a mistake anywhere in the fol-
lowing steps, press the ON/OFF button
once to turn -OFF- and again to turn back
to -ON- so you may begin over again.
Summary of Contents for EarthPulse v.4.7
Page 1: ......
