Function Buttons:
5) CHOOSING MODES:
To familiarize
yourself with MODES function please scroll
up and down through the menu using the
UP / DOWN arrow buttons.
You may choose between MODES;
•
SLEEP 1 - 4
•
RECOVER
•
ENTRAIN-UP
•
ENTRAIN-DOWN
•
ALERT
See Sleep Mode chapter or applicable
Appendix section for in depth explana-
tion of frequency range for each.
5a) For your initiation session
please CHOOSE MODE -
RECOVER.
Press the UP or DOWN arrow until
MODE - RECOVER is visible on
screen. Press the ENTER / START
button. Your screen will show the
chosen MODE and
8:00 (hours).
6) SETTING TIMER:
use UP DOWN AR-
ROW BUTTONS to set timer (in intervals of
15 minutes).
•
Timer can be set for up to 12 hours
in MODE SLEEP 1-4, RECOVER &
ALERT
•
For ½ - 1 hour ENTRAINMENT-UP
•
1 hour (ONLY) ENTRAINMENT-
DOWN.
•
Set timer now for 1:15 (1 hour
15 minutes or more if you would
like).
Once timer shows desired time press EN-
TER/START button to begin. You should
see
blue
diode BLINKING
.
BLINKING di-
ode represents output being generated by
controller. The diode’s pulse repetition rate
will change tempo depending upon pro-
gramming and time lapse.
7) The BLINKING set of numbers on the
screen = how many hours : minutes left in
the program run-time prior to shut down.
7a) The “R” stands for RECOVER.
(MODES SLEEP 1-4 SHOW
“S1”, “S2”, “S3”, “S4” next to
non-blinking time-setting.
7. Testing pulsed magnetic output;
by
taking the metal CROSS - POLARIZING
ring and use as a magneto-sensor.
See
photo below.
Hold the edge of the ring 1/2 cm (1/4 inch)
over the screw-driver-slit in center of the
core (notice you will feel it pull in time with
Summary of Contents for EarthPulse v.4.7
Page 1: ......
