12
Manual_CUT_4062_2021-10-008.00_EN.docx
Switching on / off:
The light can be switched on and off via the sensor switch
on the light head.
Switching on: Touch the sensor for a brief moment -> the
light will be switched on (switch-on value is the last dim-
ming value).
Switching off: Touch the sensor again for a brief moment
-> the light will be switched off.
Dimming: Touch the sensor until the desired brightness is
obtained. To reverse the dimming direction, briefly inter-
rupt touching the sensor.
Note:
The illumination is equipped with overheating protection. In case the luminaire is switched off because of a risk of overheat-
ing, the luminaire must be cooled down, before being put back into operation.
Warning: Fire hazard!
When not in use, cover the magnifier against solar radiation. To do this, use the bag in-
cluded in the scope of delivery.
