background image

3.          Mode 

  
Auto Mode—Continuous Drying Mode cycle, press once to switch the mode from 
one to each other, the corresponding indicator will light up. 

MACHINE SETUP & OPERATION

Button Function

1.          Power

In the standby status, press the "POWER" button to turn on the machine, the 
operation indicator lights up, the default fan speed is high and the default 
humidity is 50%. In the power-on status, press the "POWER" button to turn off 
the machine, the running indicator light goes off and the compressor stops 
immediately, and then the fan shut off after 30 seconds delay.

2.          Humidity

Press the "HUMIDITY" button to check the current environment humidity, press again 
to set the humidity. The range of target humidity is

 

30%- 35% - 40% - 45% - 50% - 55%- 60% - 65% -70% - 75%- 80%. 

After setting for 3 seconds, the system will confirm the input value and then the machine 
exit setting status, and return the current humidity. 
In the Drying Mode, the target humidity cannot be changed.
Long press the "HUMIDITY" button for 3 seconds will display the current ambient 
temperature.

Blue

humidity<46%

Green

44%≤humidity≤66%

Red

humidity>64%

DIGITIAL DISPLAY

OPERATRIONS

Summary of Contents for D001F





















Reviews: