PRO PAR Quad 12
User Manual
PRO PAR Quad 12
P a g e
|
2
Stage Light Company, LLC
©
2014
2.
The Fixture
Rigging
The fixture may be mounted in any safe position provided there is enough room for ventilation.
When mounting the fixture use a certified theatrical rigging clamp. When mounting overhead ensure to
use properly rated rigging.
A safety cable is
ALWAYS
required.
Control Board Operation
Press the
MENU
until one of the following displayed:
Display
Function
AddR
To set DMX address
CHA
To set DMX channel modes: CH10, CH06, CH04
dIM
To set dimmer speeds: dIM 1, dIM 2, dIM 3, dIM 4
USER
To set user mode intensity of R, G, B, W separately for color mixing and strobe rate
PROM
To set built-in automatic programs: PR 01 ~ PR 05 and speeds 000 ~100
COLR
To set static colors CL 01 ~ CL 15
SOUd
To set sound active mode and the sensitivity (S 000 ~ S 100)
SLAV
To set Master/Slave modes
Keep pressing
MENU
button to select your desired operation, this press
ENTER
to confirm
DMX Addressing
After selecting the “AddR” and pressing ENTER, use UP and DOWN to set the desired DMX address
(001~512), press ENTER again to confirm. “d.xxx” will display.
DMX Modes (Three DMX modes)
After selecting the “CHA” and pressing ENTER, use UP and DOWN to set the desired DMX mode
(CH10 / CH06 / CH04), press ENTER again to confirm. “d.xxx” will display.
Dimmer Speed Setting
After selecting the “dIM” and pressing ENTER, use UP and DOWN to set the desired dimmer mode
(dIM 1 / dIM 2 / dIM 3 / dIM 4), press ENTER again to confirm. “d.xxx” will display.
User Mode
This mode allows the user to set intensity of R, G, B, W separately to get endless color mixing from the
control board without a DMX controller present.
After selecting the “USER” and pressing ENTER, use UP and DOWN to select “R / G / B / W” for color
intensity or “S” for strobe. Use UP and DOWN to set the color intensity values (0~255) or strobe
speed values (0~100), then press ENTER to confirm. “US- -” will display.