SLAYER ESPRESSO V3 USER MANUAL V5.1 | AUGUST, 2022
14
STEP 4:
CONNECT WATER LINE
IMPORTANT:
Before connecting a water treatment system to your
espresso machine, rinse the system by running water through it for at
least two (2) minutes. Failure to follow this step will result in equipment
damage. Read the Water Treatment Requirements on pages 6-7 for
information about avoiding and addressing water-related issues.
PARTS AND TOOLS:
• 40
"
x3/8
"
braided stainless steel hose
• Two (2) 60
"
x3/8
"
braided stainless steel hoses
(with 90-degree fittings)
• Wrench
PROCEDURE:
1.
Use the shorter, 40”x3/8” braided hose to connect the water
treatment system outlet to the pump inlet.
2.
Use one of the longer, 60”x3/8” hoses to connect the pump high
pressure outlet (red) to the espresso machine high pressure inlet
marked with a red band around the fitting (located at the bottom-rear
of the machine).
• The hose end with the 90-degree fitting should connect to the
espresso machine.
3.
Use another of the longer, 60”x3/8” braided hoses to connect
the pump low pressure outlet (blue) to the espresso machine low
pressure inlet marked with a blue band around the fitting (located
near the drip tray).
• The end with the 90-degree fitting should connect to the espresso
machine.
• Leave steam actuators in the “on” positions for “Step 8: Turn on
Heating Elements”.
INLET FROM WATER
TREATMENT SYSTEM
OUTLET TO HIGH
PRESSURE (RED)
OUTLET TO LOW
PRESSURE (BLUE)
