3
Operational Guidance
The two 5.8GHz wireless receiver modules, the two independently workable display modules and the new DVR
system used to support the 2D & 3D display modes are built in the SKY03 FPV goggles. The wireless receiver
system can work in the diversity receiver mode to improve the receiving effect. In this mode, the channel and band
settings for wireless receiver can be compatible with most of the conventional ISM 5.8GHz transmitters, in order to
support the 6 bands and the 48 channels (for detailed bands and channels, see the specification).
The matching 3D camera SCAM303 and the conventional 5.8G transmitter can be put into use in the 3D mode.
The two lenses of the 3D camera can be set for shot by means of the parallel method. When the camera is set for
a certain close shot, the third dimension will be enhanced effectively. When the camera is set for a long-distance
shot, the third dimension will be weakened, but the more vivid visual experiences will be presented as a whole.
The new DVR system can not only further enhance the quality of analog video recording, but also can make
use of the high-quality H.246 video compression technology to better restore the video screen, save the more
storage space, support the 128GB high-capacity memory card(UHS-I U1), and support the automatic video
recording function. For details, see the description of the "Video" section.
Quickstart
Preparation
·
Install the lenses, goggles, antennas and memory cards for the FPV goggles.
·
Connect the SCAM303 camera to the transmitter, and turn on the power; set the working channel
according to the transmitter instructions; switch on the power for the SKY03 FPV goggles; long press the
power button for 3 seconds to turn on the machine (and then long press the power button for 3 seconds
again to turn off the machine).
·
Short press the <BAND and CH> buttons to adjust the channel and keep consistent with the transmitter
to watch the picture taken by the camera.
·
Slide the IPD adjuster to adjust the interpupillary distance.
Channel Search
·
Button Function
·
Long press the <CH Search > button to pop up the channel search menu.
