Pan Tracking Range Setting
·
1 long beep refers to 90 degrees, 2 long beeps refer to 180 degrees
·
Short Press "HT" button to change the working Range with corresponding beep
·
Long press "HT" to return (with 1 short beep) PPM channel setup mode.
Please disconnect the power after setup and then reconnect to enter normal working mode.
Short press "HT" button is ok to setup head tracker into Center position while working.
Front Camera
·
The Front Camera is Wide-Angle Camera with 680X480(VGA) Resolution and good low Illumination. It's very
convenient to view around without taking off the Goggles.
·
Press "Camera" button to open the Front Camera.
Volume
·
Each boot is automatically set to the lowest volume to avoid sudden loud boot.
·
A long beep indicates that you have reached the MAX or MIN Volume. .
Display Setup
Interpupillary distance
（
IPD
）
Adjustable
·
Pull the IPD Adjuster to adjust the interpupillary distance
Brightness/ contrast settings
·
It's easy to setup the Brightness/Contrast with the 5-direction switch. Short press is to adjust gradually, long
press is to adjust continuously. It will auto saved if there is no operation within 5 secs.
·
Press Center button to adjust Brightness/Contrast to factory default.
AV input
·
The goggles support AV IN. The wireless model will close when the AV IN is connected.
·
The Front Camera is ok for use under AV IN mode.
AV output
·
Div. AV Out is the diversity Video and Audio output
·
Earphone port is audio output for connecting earphones.
