2nd Audio language
: Use
t
u
to select a language that will be played when the language selected
at
1st Audio language
isn’t available.
Subtitle Type
:
Select the preferred subtitle type to be displayed automatically. Select
Normal
or
Hard of Hearing
*
Subtitle Display
: Select
On
to activate displaying of subtitles.
1st Subtitle Language
: Use
t
u
to select the first preferred subtitle language.
2nd Subtitle Language
: Use
t
u
to select the second preferred subtitle language.
* Availability of DVB/Hard of Hearing subtitles depends on the broadcast. If such subtitles are not supported, then most
likely subtitles can be activated via Teletext if available.
7.3.2 Output Settings
Use this menu to match your receiver to your TV set and/or home cinema set.
The following settings are available:
HDMI Resolution
:
Select the video resolution of your TV screen. The options are:
Auto
(automatic detection of video resolution offered to the receiver) and manual
selections
480i, 576i up to 1080p
Please use a setting that matches the
specifications of your TV. Selection above 576i is only applicable to the HDMI
output.
Aspect Ratio
:
Select the aspect ratio of your TV. The options are:
4:3
for 4:3 screen and
16:9
for 16:9 TV sets.
Aspect conversion
:
Select the preferred conversion method. The options are:
PanScan
: displays
16:9 widescreen broadcasts in full screen on a 4:3 TV.
Letterbox
: black bars
on top and bottom of the picture on a 4:3 TV.
Combined
: shows a mix in-
between.
Ignore
: shows as it is.
Connection
:
Select the connection to your TV set. Select
HDMI
or
TV SCART
.
TV SCART
will
provide RGB on SCART. If the connection type HDMI is selected, then only the
CVBS signal will be available on the TV SCART.
OSD Transparency
:
To set the OSD transparency from
Off ~ 50%
with 10% steps.
OSD Timeout
:
Sets the time after which on screen banners and messages disappear. The
range is
3~10
seconds.
HDMI Audio Output
:
Toggles between
PCM
and
Bitstream
output. When
PCM
is selected, all digital
audio will be converted to stereo audio.
Bitstream
enables you to listen or
transfer Dolby® Digital/Dolby® Digital Plus* audio to the TV via HDMI or to a
home cinema set.
SPDIF Audio Output
:
Toggles between
PCM
and
Bitstream
output. When
PCM
is selected, all digital
audio will be converted to stereo audio.
Bitstream
enables you to listen or
transfer Dolby® Digital/Dolby® audio to a home cinema set through coaxial S/
PDIF. (Not Dolby® Digital Plus.)
Audio Description
:
AD. Set this option to
On
if you like to have support of an audio track that
describes the content on screen. Useful for the visual impaired.
Audio Description Volume offset
:
Select the volume from the AD audio track.
* Dolby Digital Plus, Dolby Digital and the double-D symbol are registered trademarks of Dolby Laboratories
17
