18.
LIST
Call the current channel list.
19.
CH+/CH-
Channel up/down.
20.
OPT
Opens quick menu to adjust screen settings
21.
TEXT
Opens the Teletext* if available
22.
SUB
Shows a list of subtitle* languages.
23.
To read messages from your provider.
24.
2
Hold play during playback/starting Timeshift mode**
25.
5
6
Fast rewind/fast forward.
26.
4
Starts recording of the currently watched programme**
27.
u
Opens the multimedia menu
28.
7 8
Jump function in multimedia playback
29.
3
Stop playback.
30.
COLOUR BUTTONS
In different menus for specific functions
* Subtitles, Videotext, EPG (Electronic Programme Guide), and Audio languages are depending on availability in the
specific broadcast
** This user manual describes the full functionality including the recording function and may not be applicable if the
software for recording via USB has not yet been installed (available in our web shop: www.strong.tv).
2.5 Installing the batteries
Fig. 4
Open the cover on the remote control and insert 2x AAA type batteries into the compartment.
Observe correct polarity of the batteries when inserting. A terminal diagram is shown inside the
compartment.
1. Remove the cover.
2. Insert the batteries.
3. Place the cover.
2.6 Using the remote control
Fig. 5
To use the remote control, point it towards the front of your receiver. The remote control supports a
range of up to 5 meters distance to the receiver at an angle of up to approx. 30 degrees.
NOTE:
Managing the receiver will be limited or not possible if there are obstacles
between the remote control sensor (at the front panel of the receiver)
and the remote control. Direct sunlight or very bright light can reduce or
disturb the reception of the remote control signals.
3.0 CONNECTION
3.1 Connecting to a terrestrial antenna
Fig. 6
7
