Skyworth LCD-37L16, Instruction Manual

Page: 5 / 18

Locate the receiver in the room where direct light does not strike the screen.
Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect
lighting is recommended for comfortable viewing.
Allow enough space between the receiver and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature
component failure.
This TV operates on AC supply directly, connect the AC plug to the socket at the back of the TV.
Insert the mains plug in the socket having a mains voltage of 100-240V AC.
Do not install the receiver in a location near heat sources such as radiator, air ducts, direct
sunlight, or in a place somewhere like close compartment and close area.Do not cover the
Features
Up to 200 programme memory.
Programme swapping.
Sleep timer.
Original / 16:9/16:9 Zoom / 16:9 Sub /
14:9 picture modes.
When no TV signal is dectected,after 15
minutes the TV switches itself automatically
to stand-bymode.
CYS: PAL / SECAM
SYS: BG/DK / I
HDMI Input (support up to 1080i)
PC Input (support up to 1080i)
NICAM Stereo / AV Stereo
Panel Features
High resolution (1366x768),37" TFT LCD
display.
2
Brightness: 500cd/m
High-speed response time <8msec.
8-bit color depth,display 16.7M colors.
High contrast ratio (1600:1 Typital)
0 0
Viewing angle:178 (H)/178 (V)(CR>10).
In The Box
Television
User Guide
You should have:
Remote control
Warranty Card
2 x AAA battery
Stand
Wall mount
SETUP SETUP
-2-