Skyworth LCD-37L16, Instruction Manual

Page: 12 / 18

MENU BUTTON
1.Press menu button to display analog menu ,and press VOL.+/- to select sub menu.
2.After entering an item, you can select the desired adjusting item by the VOL.+/- Buttons
and adjust It by the PROG. +/- buttons.
1. Plug in the power source. The power indicator will light up. If TV is in stand by mode.
Then Press
¡° ¡±
key. The picture will display in few minutes.
Press the MENU key to invoke the main menu:
use VOL.+/- buttons to select the main icon the
focused icon will be shown as protruded button.
Press the PROG.+/- buttons to go to the
corresponding menu.
Enter VIDEO menu, you can select Picture Mode,
Brightness, Contrast, Sharpness, Color, Color Temp and
N.R. items by pressing PROG.+/- buttons.
Picture Mode
Press the VOL.+/- buttons to change the picture mode.
Such as User, Standard, Mild, Dynamic mode.
Contrast
Press the VOL.+/- buttons to increase/decrease the
contrast of the picture.
Brightness
Press the VOL.+/- buttons to lighten/darken the picture.
Sharpness
Press the button to sharpen or soften the picture.
Saturation
Press the VOL.+/- buttons to increase/decrease the
color saturation.
Tint
Press the button to rectify the tonality of picture.
Color Temp
Press the button to select a suitable color temperature
to display.
The choices are Cold, Normal, Warm.
Noise reduce
Press the button to select off,low,mid,high to
adjusts the dynamic noise reduction level of
image.
ANALOG MENU SCREENS ANALOG MENU SCREENS
Video menu
-9-
VIDEO AUDIO SETUP TIME OPTIONS