5.2 Dynamic Changes to Output Frequencies while Changing PLL Settings Using a CBPro Register Map
This section applies to the following scenario:
1. A CBPro generated register map "is" used to program either the voltatile or the non-volatile memory of a Si5391.
2. This needs a register write sequence provided in the CBPro export section as shown below.
Figure 5.1. CBPro Register Write Sequence While Changing PLL Settings
Si5391 Reference Manual • Dynamic PLL Changes
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com
12
Rev. 0.5 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 11, 2022
12