IDP 700 Terminal Series - Hardware Guide
T206, Version 01 24 © SkyWave Proprietary
Figure 17 Sample Activation Report
4.3
Identify the Fuse Panel Location
For installation in a truck, the cable from the terminal connects to the truck's fuse panel
for power.
1.
Locate the fuse panel in the truck. The location depends on the type, age, and
model of the truck.
2.
Identify an un-switched vehicle power source within the fuse panel for terminal
power.
3.
Ensure that your cable is of sufficient length to reach from the fuse panel to the
final mounting location of the terminal.
4.4
Determine a Suitable Mounting Location
Before installing the terminal, consider the important guidelines provided below.
CAUTION
Most users install the terminals in a vehicle. It is very important
for installers to install the terminals in a safe and secure way to
avoid danger or damage to persons or property.
CAUTION
Do not mount or operate near
flammable gases or fumes.
Mount indoors, inside a vehicle, or in an area protected from environmental elements.
The Mobile ID is the serial number which appears
on the mobile device and is used to uniquely identify
the device when sending and receiving messages
Access ID and password required
to securely access your messages
over the Internet
Summary of Contents for IDP 700 Series
Page 70: ...www SkyWave com ...
