17
1.
Sleeve the Straight Tube (5) and Curved Tube (6)
with foam (8). Lay one Straight Tube (5) with foam and
one Curved Tube (6) with foam on the ground, insert
the StraightTube(5) into the curved tube(6), secure
with the screw(4).
Repeat this step to attach the five remaining Straight
Tubes(5) and Curved tubes(6) together (not shown).
4
5
6
1
Enclosure Assembly
V-ring
Jump mat
7
2
Inspect the attachments of the enclosure
Netting to the trampoline mat (bed). Make certain each of
the V-rings on the trampoline mat (bed) is threaded
through the corresponding “buttonhole” in the Netting.
2.
