15
Caution: Do not use the trampoline without the Frame Pad
(6). The Frame Pad is designed to reduce the possibility of
injuries due to jumpers coming in contact with the tram-
poline frame. If you do not have a Frame Pad, contact
your dealer to obtain one. Properly install the Frame Pad
before using the trampoline.
6.
Look underneath the trampoline. Locate the straps
attached to the underside of the frame pad. Position each outer
strap so that one strap is on each side of the frame as shown.
Tie the outside straps sewn to the Pad Joints to each side of the frame
as shown and attach the inner straps to the near V-rings.
Repeat this step with the remaining straps (not shown).
9
Outer Straps
Frame
Strap sewn in the outside of
the Joint for the pad bottom
Inner Straps
V-ring
Socket
Socket
5
5
6
. Lay the Frame Pad (9) on the frame. Adjust the posi-
tion of the Frame Pad so that the slits of the pad are just
above the holes of the socket of frame, as shown.
Caution: Do not use the trampoline without the Frame Pad
(6). The Frame Pad is designed to reduce the possibility of
injuries due to jumpers coming in contact with the tram-
poline frame. If you do not have a Frame Pad, contact
your dealer to obtain one. Properly install the Frame Pad
before using the trampoline.
Using the included plastic tie, attach the Safety Placard
to the frame near the point where jumpers will climb
onto and off the trampoline.
