4
!
!
9
STEP 6
Using the parts to the above, connect two yellow tubes
(2)
to the top holes of two plates
(8)
that are side by
side on the second ring of the geo dome. Now connect the top of the two yellow tubes to a 6 holes plate
(8)
(your tubes and plate should look like a triangle.)
Now using the green tubes (short)
(4)
and the plate
(9)
repeat
the above step. Continue assembly alternating the two parts groups until complete.
Note:
The 10 holes plate
(9-2)
should be placed on either side of a 6 hole plate
(8)
like shown in picture
B
. These
plates will be used to attach the geo dome accessory. If you haven’t purchased the accessory, please secure
the M8x10mm Bolt
(11)
into the open holes as shown in picture
C
.
Note: The frame will look uneven at this point, this is normal and will correct with further assembly.
Yellow tube
(x12)
Green tube
(short)
(x12)
2
4
Plate with
6 holes
(x6)
Plate with
5 holes
(x4)
Plate with
10 holes
(x2)
8
9-1
9-2
M8x12mm
Bolt
(x48)
M8x10mm
Bolt
(x10)
M8 Washer
(x58)
10
11
12
(3)
(3)
(3)
(3)
(8)
(8)
A
B
(8)
(9)
(9)
(9)
(3)
(4)
(4)
(4)
(8)
(11)
(9-1)
(9-2)
(3)
Accessory set
(4)
(4)
C
(11)
(11)
(11)
(11)
