10
ASSEMBLY
STEP 7
Using the parts to the left, connect the Red tubes
(5)
at the side
holes of the plates
(8)&(9)
from step 5. Continue attaching until
you have attached all the
tubes to the plates completing the third ring of the geo dome.
NOTE: We found as you continue adding rings to the geo dome,
you may have to shift the assembled bars around slightly in
order to line up all of the holes .
Red tube
(x12)
5
M8x12mm
Bolt
(x24)
M8 Washer
(x24)
10
12
(5)
STEP 8
Attach a red tube
(5)
to the middle
hole of a 5 hole plate
(9)
. Now attach a
yellow tube
(2)
to each 6 hole plate
(8)
on either side of the red tube. Connect
all three tubes to a 6 hole plate
(8)
to
create a shape like the one in the image
below. Repeat this step until complete.
Plate with
6 holes
(x6)
8
M8x12mm
Bolt
(x36)
M8 Washer
(x36)
10
12
Yellow tube
(x12)
Red tube
(x6)
2
5
(5)
(5)
(5)
x6
(2)
(2)
(8)
