www.skywalker-model.com
Entire Contents © Copyright 2010 4 V1.05
Step 12:
Also, apply a thin layer of the EPO glue on the area at
the root of both vertical stabiliser fins, where the
vertical stabiliser fins and the wing tips will be joint.
Step 13:
Wait for about 1~2 minutes for the glue to solidified
slightly before sit the vertical stabiliser fins onto the
wing tips for both sides.
Step 14:
Prepare suitable amount of hobby epoxy glue (not
included) for about 5~10ml. Mix the A and B epoxy
well.
Step 15:
Apply the mixed epoxy glue into the carbon-rod slot at
the top wing surface.
Step 16:
Place the
ϕ
6mm carbon-rod (length of 640mm) into
the slot. Hold the carbon-rod in place until the epoxy
solidified.
