ASSEMBLY
7
STEP 1
Register your Monkey Bars Accessory! For info on
warranty registration, see page 2.
READ THIS BEFORE YOU BEGIN
• We’ve provided some tools to help with assembly, but you’re more than welcome to use your own
• The assembly steps refer to parts by their descriptions and key numbers (see the part list on page
3)
• The assembly steps are written in a specific order, and if you don’t follow them exactly, you may end up having to
start all over again
• Most importantly, this may not be the easiest thing you’ve ever done, but it will be
worth it
. Trust us
STEP 2
Top Cross
Bar
(x6)
5
(5)
YellowPlastic
Protector
(x12)
13
M6X40mm
Button Bolt
(x12)
15
M6 Washer
(x12)
16
M6 Lock-
nut
(x12)
17
Attach the Yellow Plastic Protector
(13)
to the Top Cross Bar
(5)
wiith two M6
X40mm Button Bolt
(15)
, two M6
Washers
(16)
and two M6 Locknuts
(17). Repeat this step until the other
assembled! Don’t tighten the locknuts.
(13)
(13)
(15)
(15)
(16)
(16)
(17)
(17)
Yellow
