19
TV I
nsTallaTIon
& C
onneCTIons
|
Owner’s Manual -
Model
NXG-DS|4k-5550-L / 4k-5570-L
Connecting to a Cable Box or Satellite
Connecting with HDMI Cable
(Best Option)
1. Make sure the power of the TV and your set-
top box is turned off.
2. Connect a HDMI cable to the HDMI output
of your set-top box and the other end to the
HDMI port off the back of your TV.
3. Turn on the TV and your set-top box.
4. Use the remote control’s input button or the
input button on the bottom side of the TV to
switch to HDMI 1.
Please Note :
1. Refer to the set-top box’s manual, to make sure the
settop box is configured to output correctly to the TV.
2. If HDMI 1 is already occupied, use HDMI 1 as your
connection port and switch source to HDMI 3.
3. This TV will turn off automatically if there’s no signal
present for more than 15 minutes.
Connecting with Component
1. Make sure the power of TV and your
set-top box is turned off.
2. Obtain a Component Cable. Connect the
green color connector to both your
set-top box and Component green
a connector port off the back of your TV.
3. Connect the blue color connector to both
your set-top box and Component blue
connector port off the back of your TV.
4. Connect the red color connector to both
your set-top box and Component red con-
nector port off the back of your TV.
5. Obtain a RCA Audio Cable. Connect the
white color connector to both your
set-top box and Component white connec-
tor port off the back of your TV to the right side of your green, blue, red component connection.
6. Connect the red color connector to both your set-top box and Component red connector port off the back
of your TV to the right side of your green, blue, red component connection.
7. Turn on the TV and your set-top box.
8. Use the remote control’s input button or the input button on the TV to switch to componet.
Located on Back of TV
Cable Box
Satellite
OR
COAXIAL
(AUDIO OUT)
Cable Box
Satellite
OR
Located on Back of TV
