Wiring (see fig. 5):
Connect the wires of terminals 1, 2, 3 & 4 on the rear panel of the monitor to the same terminals at the
rear panel of the camera (1, 2, 3 & 4). Connect the wires of the adapter to the terminals 7 & 8 at the
rear panel of the monitor (7 = red, 8 = blue).
As an option, you can install an automatic door opener to the terminals 5 & 6.
Configuration
Monitor (fig. I):
1. Telephone
handset
2. Speaker (for extension e.g. with an intrusion alarm)
3. On/Off
button
4. CRT screen (shows the picture taken by the camera)
5. On/Off
LED
6. Camera button (press this button to see who is ringing at your door)
7. Door release (press this button to open your door if you have installed an automatic system)
Camera (fig. II):
8. CCD
camera
lens
9. Infrared LED (ensures a good picture even in the dark)
10. Microphone (to communicate with the monitor)
11. Camera mounting bracket (to fasten solidly the camera on the wall)
12. Speaker (2-weg intercom between monitor and camera)
13. Door bell button (if this button is pressed, a sound from the monitor informs you that somebody is
ringing at your door)
Specifications
Monitor
Power supply: ............................................. 90-240Vac / 50Hz, via supplied adapter
Power consumption: ...................................................operating: 11W, stand-by: 2W
Operating temperature: ............................................................................0°C – 50°C
Communication system: ...............................................duplex handset conversation
Call signal: ..................................................................................................dual gong
Communication time: .............................................. automatic cut-off after 2 minutes
Wiring: ............................................................. 4-wires: sound, video, power, ground
Max. wire runs: ................................................................... 4 wires: 50m, coax: 80m
Scan frequency: .................................................horizontal: 15.62kHz, vertical: 50Hz
Dimensions (hxwxd): ........................................................ 58mm x 196mm x 228mm
Weight: ............................................................................................................1.238 g
Camera
Power supply: ...............................................................................12Vdc, via monitor
Power consumption: ......................................................................... operating: 2.5W
Operating temperature: ........................................................................ -10°C – 50°C
Picture sensor: .............................................................................................1/3” CCD
Picture angle: ............................................................horizontal: ± 71°, vertical: ± 53°
Minimum lighting: ............................................................0.1 Lux @ 300mm distance
Dimensions: (hxwxd): ....................................................... 22mm x 120mm x 184mm
Weight: ...............................................................................................................208 g
•
Subject to changes without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty.
Do not make any changes to the unit. This would also invalid your warranty.
The warranty is not applicable in case of accidents or damages caused by inappropriate use or disregard of the warnings contained in
this manual.
SkyTronic UK cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This
is also applicable to all damages in whatever form.
