I-MT REV. 7-23-15 Page 2
Specifications
3
Preparation for Non-Conbustible Structure
4
Hard Piping to Fire Pit
4
Cross Ventilation Requirements
4
High Elevation
4
Installation into an Approved Enclosure
5
Requirements
5
Installing Key Valve
5
Typical Installation Drawings
6
Operation
7
Lighting Instructions
7
Replacement Parts
8
Replacement Parts List
9
Fire Pit Maintenance/ Trouble Shooting
10
Optional Accessories
10
TABLE OF CONTENTS
MT Burning Spur Fire Pits
Fuels used in gas fired appliances, and the products of combustion such as fuels, contain
chemicals known to cause cancer, birth defects and/or other reproductive harm.
This warning is issued pursuant to the California Health & Safety Code Sec. 25249.1
NOTE:
An exterior lid/cover is not required but highly recommended when the fire pit is not in
use. Even though fire pits are designed for outdoors they are not impervious to all weather
conditions if not protected. See the accessory page for information and sizes.
Firegear Outdoors offers lids/covers for most common sized fire pits however due to many
custom applications a lid may not be available for your particular fire pit. If this is your
situation, you may need to custom order or design a lid for your fire pit from another supplier.
