Model
: AF-4000HAT (Home Automation Transmitter)
DESCRIPTION:
The AF-4000HAT is a simple transmitter compatible with home automation systems to turn
ON
and
OFF
a gas fire feature. The home automation system sends an ON command to close the dry contacts of the AF-4000HAT.
The transmitter receives the command then it sends a wireless RF signal to the gas fire feature to turn it
ON
. When the
home automation systems sends a command to turn OFF the AF-4000HAT transmitter sends a wireless RF signal to turn
OFF
the gas fire feature.
This AF-4000HAT is designed to operate with the following Skytech Products Group control modules: AF-4000MOD-1,
AF-4000MOD## SERIES, VCS-4000MODTC, VCS-4000MODS01,VCS-4000S-1TC, AF-5000MOD-1, VCS-5000MODTC,
VCS-ECOMOD, VCS-ECOMODODS, VCS-ECOMODPVI.
Low voltage wire (not provided) from the Home Automation System must connect directly to the AF-4000HAT transmitter
and must be located within 20-feet of the control module.
IF YOU CANNOT READ OR UNDERSTAND THESE INSTALLATION INSTRUCTIONS DO
NOT ATTEMPT TO INSTALL OR OPERATE THIS PRODUCT
CONTENTS
Fig. 1
Basic Operation of the AF-4000HAT System
OFF
AUTO
ACTIVE
OFF
HOME AUTOMATION LINK
Fig. 2
Contents: (1) HAT transmitter, (1) Face plate (1) Bolt bag with screws
and slide button (4) AA Batteries (not shown)
Skytech AF-4000HAT
Pool/Home
Automation
System
ACTIVE
OFF
HOME AUTOMATION LINK
Wireless RF Signal
Low Voltage
Wire
(Dry Contact Switch)
Gas Logs / Gas Fireplace
Or
Outdoor Gas Fire Feature
REV. 3-8-16 Page 1
f i r e - p a r t s . c o m
