LEARNING THE AF-4000HAT TO THE CONTROL MODULE
Skytech AF-4000HAT
NOTE
: The AF-4000HAT is designed to operate with AF-4000MOD-1, AF-4000MOD## SERIES, VCS-4000MODTC,
VCS-4000MODS01,VCS-4000S-1TC, AF-5000MOD-1, VCS-5000MODTC, VCS-ECOMOD, VCS-ECOMODODS, VCS-
ECOMODPVI.
Step 1
: Ensure the control module REMOTE/OFF switch in the
REMOTE
position. See fig. 8.
Step 2
: Slide AF-4000HAT switch to the
ACTIVE
position. See Fig.9
Step 3
: Press and release the LEARN button on the control module and
listen for a “beep”. See fig. 9.
Step 4
: Slide the AF-4000HAT switch to the
OFF
position. See fig. 11.
The module will emit several beeps indicating the
AF-4000HAT is now programmed and will operate with the
Home Automation System when the switched is placed back
in the
ACTIVE
position as shown in fig. 9.
Learn Butt
on
AUX
POWER
PEN
MODULE
Fig. 10
Learn button on control module.
ACTIVE
OFF
HOME AUTOMATION LINK
Fig. 9
AF-4000HAT switch
to ACTIVE position.
ACTIVE
OFF
HOME AUTOMATION LINK
Fig. 11
AF-4000HAT switch
to OFF position.
IMPORTANT NOTE
: The AF-4000HAT only controls ON/OFF of gas fire feature; not the Hi/Lo operation. The control
modules can “learn” more than one transmitter, which may have Hi/Lo control allowing the use of a hand held
transmitter in conjunction with the AF-40000HAT. Check with your dealer to find out which wireless hand held transmitter
can be used with your system.
Remote/Off
S
I
ADJ.
IP
I
POWE
R
Learn
AUX
REV. 3-8-16 Page 3
Fig. 8
Remote switch position.
f i r e - p a r t s . c o m
