3
4. DISPLAY
LCD Display lndicate the Track/Numbers/Time/Remain/Pitch/Continue/Single.
5. IN BUTTON ( LOOP SYSTEM )
This button sets the beginning of the loop. The Loop indicator on the display flashes.
6. OUT BUTTON ( LOOP BUTTON )
When you press this button, you set the end point of the seamless loop and you start the loop. To
finish the loop, press again this button.
7. RELOOP BUTTON ( LOOP SYSTEM )
This button is used to start the last saved loop. To finish the loop, press the reloop button.
8. CONT. / SINGLE BUTTON
Press these to switch between the SINGLE and CONTINUOUS play mode. The selected mode is
indicated on the LCD. In SINGLE mode, after each track, the unit stops the reading. In
CONTINUOUS mode, the unit read all track and stops.
9. REPEAT
BUTTON
Use this button to repeat one track or all the track of the CD.
10. TIME BUTTON
Used this knob to choose the time mode : Elapsed time, remaining time or total remaining time.
11. OPEN/CLOSE BUTTON
Press to load or eject disk. Each press will open or close the disk tray.
NOTE: disc holder will not open unless stop or pause button has been pushed fir.
12. TRACK SELECT BUTTONS
Pressing 0-9 buttons, allow you to select tracks from the CD.
13. CD/USB/SD BUTTON
Press this button to choose CD or USB or SD mode while USB connect and the CDs in the tray
and the SD CARD insert the main unit.
14. PROG BUTTON
In STOP mode, you can program several tracks (20 tracks max.):
-
Press the STOP button to enter in the stop mode
-
Press the PROG button to enter in the program mode
-
Use the skip track buttons to choose the track you want to listen then press the PROG button to
enter your choice.
-
Use one more time the skip track buttons to choose the track you want to listen then press the
PROG button to enter your choice.
-
Repeat the operation to select all the track you want to listen
-
Press the PLAY / PAUSE button to start the playback
15. PITCH BEND - BUTTON
The pitch will drop while the - button is pressed and return to the original pitch when it is released.
16. USB PORT
Allows the connection of any USB memory stick.
17. PITCH BEND + BUTTON
The pitch will automatically rise when the + button is pressed and return to the original pitch when
it is released.
