Skytec STC-55, User Manual

Page: 2 / 25

IMPORTANT
Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
Controller function
1.JOG&SHUTTLE WHEELS
Search :Touch the dial and rotate it to navigate the track ,Press the jogmode button and the
light is illuminate first.
Pitch: During playing ,rotate the dial to adjust the pitch bend
Cue point: In pause state ,Rotate the dial can navigate the track and once you enter a point
which you desired then press play/pause button and the CUE button light blink three times. Record the point
successfully. Note:(Rotate the dial ,clockwise is forward counterclockwise is backward)
2.PLAY / PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from pause to play.
3.CUE BUTTON
To define and record a return point from which playback it again.
4.PITCH BEND+BUTTON
The pitch speeds up when the +button is pressed and re turn to the original pitch when it is
released.
5.PITCH BEND
一 一 一 一
BUTTON
The pitch will slows down while the
一
button is pressed and return to the original pitch when it is released.
6. REPLACEABLE CROSSFADER
Achieves clean segues between the two input channels, Hard left selects channel 1."Hard right" selects channel
2.with the crossfader centered, both assigned channel are live Use the crossfader for fast and seamless segues from
one selected channel to the other
7.SCRATCH MODE
When the (10) is illuminated the wheel is in SCRATCH mode, you may press the SCRATCH button to exit
SCRATCH mode.