33.
OUTPUT LEVEL INDICATOR (VU
METER)
This VU-meter displays the output
levels of the lift and right channels,
GPRS1-2, headphones and control
room so that you can monitor the
output condition of the signal.
34.
ON/OFF & PHANTOM LEDs
The LEDs light up when their
functions are switched on.
35.
PHANTOM POWER SWITCH
If you press this button all balanced
microphone inputs are powered by
48V which allows the use of
condenser microphones.
36.
HEADPHONE / CONTROL ROOM
LEVEL
This single volume control sets the
volume level of the headphones
and of the monitors. Turn cw to
increase the volume and ccw to
lower it.
37.
HEADPHONE SWITCH
If the
L-R
/
G1-2 PFL
button is not
pressed in, the output signal is sent
in stereo to the monitors. If the
buttons are pressed in, the signal is
sent via the headphones. The
G1-2
fader allows you to determine the
volume level of the headphones.
38.
MASTER FADER OUTPUT LEVEL
(LEFT/RIGHT)
It’s the master fader control of the
volume level of a stereo signal. Left
and right are controlled separately.
