7
7. CUE BUTTON
Pressing the CUE button during play provides a return to the
position at which play was started.
8. PLAY / PAUSE BUTTON
Each time you press the PLAY/PAUSE button, the operation
changes from play to pause or from pause to play.
9 REPEAT BUTTON Use this button to repeat one track or all the
track of the CD.
10. PROG BUTTON
In STOP mode, you can program several tracks (20 tracks
max)
- Press the STOP button to enter the stop mode
- Press the PROG button to enter the program mode
- Use the skip track buttons to choose the track you want to
listen then press the PROG button to enter you choice.
- Use again the skip track buttons to choose the track you
want to listen then press the PROG button to enter you
choice.
- Repeat the operation to select all the track you want to
listen
- Press the play / pause button to start the playback.
11. DIGITAL OUT BUTTON
When you push this button, there are digital outputs (CINCH
and optical digital outputs)
12. A BUTTON (LOOP SYSTEM)
This button sets the beginning of the loop. The LOOP
indicator is on the display flashes.
13. B BUTTON (LOOP BUTTON)
When you press this button, you set the end point of the
seamless loop and you start the loop. To finish the loop,
press this button again.
14. RELOOP BUTTON (LOOP SYSTEM)
This button is used to start the last saved loop. To finish the
loop, press the RELOOP button again.
15. TIME BUTTON
Used this knob to choose the time mode: elapsed time,
remaining time or total remaining time.
16. CONTINUE/SINGLE BUTTON
Press this button to switch between the SINGLE and
CONTINUOUS play mode. The selected mode is indicated on
the LCD. In SINGLE mode, after each track, the unit will stop
the reading. In CONT model, the unit will read all track and
then stop.
17. PITCH BEND- BUTTON
The pitch will drop while the PITCH BEND- button is pressed
and return to the original pitch when it is released.
18. PITCH BEND + BUTTON
The pitch will rise when the PITCH BEND + button is
pressed and return to the original pitch when it is released.
19. STOP BUTTON
Press this button to stop the playback.
20. PITCH BUTTON
When this button is pressed, the adjustment of the pitch
potentiometer is available. (see item 22)
21. DISPLAY
22. PITCH CONTROL
Use this fader to increase or decrease the speed of the track.
Connection
23. DIGITAL OUTPUT (OPTICAL) PLAYER 1
Optical jack. This socket is digital output for CD player 1.
Connect to the line input of a D/A Amplifier.
24. DIGITAL OUTPUT (RCA) PLAYER 1
This socket is digital output for CD player 1. Connect to the
line input of the D/A Amplifier.
25. LINE OUT PLAYER 1
This socket is the audio output for CD player 1. Connect to
the line input of the mixer.
26. GROUND LIFT
The switch controls the ground connection of this unit.
