UK
NOTE ON USE
BE CAREFUL OF HIGH TEMPERA-
TURE
TO AVOID DUST & MOISTURE
TO AVOID PLACING ON UN-
STABLE LOCATION
DO NOT USE CHEMICALS
IF OUT OF WORK, CONTACT
SALES AGENCY IMMEDIATELY
KEEP AWAY FROM TV &
MAGNETISM
DO NOT OPEN THE CASE
CARE WITH THE POWER CORD
For Safe and Efficient Operation
•
Select the installation location of your unit carefully. Avoid
placing it in direct sunlight. Also avoid locations subject to
vibration and excessive dust, heat, cold or moisture. Keep away
from sources of hum such as transformers or motors.
•
The apparatus shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases, shall be
placed on the apparatus.
•
The MAINS plug is used as the disconnected device, the
disconnect device shall remain readily operable.
•
WARNING: The user shall not place this apparatus in the
confined area during he operation so that the mains switch can
be easily accessible.
•
Do not use this compact disc player where there are extremes
in temperature ( below 41
o
F/5
o
C or exceeding 95
o
F/35
o
C ).
•
Do not open the cabinet as this might result in damage to the
set or electrical shock.
•
Be sure your hands are clean when handing discs. Never insert
a disc which has a crack on its surface.
•
If the unit is damaged to an extent that you can see internal
parts, do not plug the unit into a mains outlet.
•
Do not use cleaning sprays for the slider controls. The
residues of these spray cause dust deposits in the controls. If
a problem occurs, please consult a specialist
•
When disconnecting the power cord from the AC outlet, always
grasp it by the plug. Never pull the cord.
•
Do not use force when operating the switches and buttons.
•
Before moving the set, be sure to disconnect the power cord
and all connecting cables.
•
To keep the laser pickup clean, do not forget to close the disc
tray.
•
If the plug and/or mains lead are damaged, they need to be
repaired by a qualified technician.
•
Do not attempt to clean the unit with chemical solvents as this
might damage the finish. Use a clean, dry cloth.
•
Keep this manual in a safe place for future reference.
•
All channel controls and the master volume control must be
set to zero prior to switching the unit on.
•
To prevent clipping of the amplifier do not set the volume
level too high.
SAFETY CERTIFICATION
Laser Diode Properties
Material: Ga.-Al-As
Wavelength: 755-815 nm (25
o
C)
Laser Output: Continuous Wave max. 0.5mW
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATIO EXPOSURE.
To prevent electric shock do not remove cover (or
bottom screws). No user serviceable parts inside
refer servicing to qualified servicing personnel.
