General
The light show consists of a number of loose lamp modules and a control unit. The lamps are music
controlled. The electronic controller and the microphone are built in the controller. The set includes coloured
230V 60W reflector lamps.
Installation and use
The light show can be used free standing in the supplied configuration or in a random built shape. The
modules are interlockable. The modules are separated by pushing the lock backwards and assembled by
putting two pods side by side or by stacking them and pushing the lock from the rear side into the rail.
Connect the lamp modules by plugging the Euro plugs from the modules into the controller as follows:
Channel 1
-
Connection 1 & 2
Channel 2
-
Connection 3 & 4
Channel 3
-
Connection 5 & 6
After having connected all modules you can plug the control unit into a mains outlet.
Directly behind channel 1 you can find the connection for low frequency sounds, behind channel 2 the
connection for middle frequency sounds and behind channel 3 the connection for high frequency sounds/
Operation
Switch the unit on. Set the sensitivity via the rotary buttons on the controller. The more the buttons are turned
clockwise, the more the lamps are sensitive to the rhythm of the music or any other sound.
Specifications
Power: .............................................................................................................. 220-240Vac / 50Hz
Wattage of the lamp modules: ........................................................................................Max. 60W
Wattage of the control unit: ....................................................................................... 6 x 60W max.
Lamp type: ........................................................................................ 60W reflector lamp type R80
Lamp fitting: ..............................................................................................................................E27
This product meets the requirements of the EMC and LVD Directives mentioned as follows:
EN 60598-2-4
EN 60238
EN 55015
EN 61547
EN 61000-3-2
Do not attempt to make any repairs yourself. This would invalid your warranty.
Do not make any changes to the unit. This would also invalid your warranty.
The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained
in this manual.
SkyTronic UK cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings.
This is also applicable to all damages in whatever form.
