3
z
Do not attempt to operate this unit, if it becomes damaged.
z
This unit is intended for indoor use only, use of this product outdoors voids all warranties.
z
During long periods of non-use, disconnect the unit’s main power.
z
Always mount this unit in safe and stable matter.
z
Power-supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to the point they exit from the unit.
z
Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See
“Cleaning” for details.
z
Heat -The appliance should be situated away from heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers) that produce heat.
z
The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a marked change in
performance.
Set Up
Power Supply:
Before plugging your unit in, be sure the source voltage in your area matches the
required voltage for your LED Par 56S/156-5mm. The LED Par 56S/156-5mm is available in a 120v
and 220v version. Because line voltage may vary from venue to venue, you should be sure your unit
voltage matches the wall outlet voltage before attempting to operate you fixture.
DMX Linking:
To ensure proper DMX data transmission, when using several DMX fixtures try to use
the shortest cable path possible. The order in which fixtures are connected in a DMX line does not
influence the DMX addressing. For example; a fixture assigned a DMX address of 1 may be placed
anywhere in a DMX line, at the beginning, at the end, or anywhere in the middle. When a fixture is
assigned a DMX address of 1, the DMX controller knows to send DATA assigned to address 1 to that
unit, no matter where it is located in the DMX chain.
Operating Instructions
Operating Modes: You can use the LED Par 56S/156-5mm in four ways:
z
Sound-Active mode - The unit will react to sound, chasing through the built in programs.
z
Auto Mode - The unit will automatically chase through the different colors.
z
RGB Mode - Choose a single color or colors to stay static.
z
DMX control mode - This function will allow you to control each individual fixtures traits with a
standard DMX 512 controller.
DMX Mode
: Operating through a DMX controller give the user the freedom to create their own
programs tailored to their own individual needs. This function also allows you to use your fixtures as
spot lights.
1. This function will allow you to control each individual fixture’s traits with a standard DMX 512
controller.
2. The LED Par 56S/156-5mm uses 5 DMX channels to operate. Please see “DMX Values and
Functions” for the DMX traits.
Summary of Contents for 151.247
Page 23: ...23...
