Skyrush Teryx 450, Instruction Manual

Page: 13 / 24

TERYX Manual
12
7.4 ROLL
Roll means to fly the helicopter sideways.
Through this function the helicopter flies left
and right to the side:
Right lever left/right: Helicopter banks to the
left/right.
7.5 NOTES ON THE 3 AXIS GYRO
The supplied control unit comes along with a couple of safety features, which are not common
in other RC helicopters. After connecting the battery pack, the system will show no reaction at
all, unless a chain of security dependencies is fulfilled. Just after those dependencies are fulfilled,
the LED on the unit will start to turn on. All outputs of the unit are turned off, including the
servos, until you start flying. Hence there is no reaction from the gyros. The unit is calibrated
properly in the factory, it doesn’t require any adjustment of the gyroscopes. But we want to
mention at this point, that a change in the sensibility of the gyros will take effort after powering
the unit off and on again. During power on, any changes on the gain pots are not taken into
account. The unit can be programmed, outputs can be inverted, the gyroscopes can be inverted,
and the travel limits of the servos calibrated – to make both ESCs spin at the same speed. A
complete and thorough manual you can find for download on our website.
8. FLYING
If you are a rc helicopter beginner, please make sure you are flying under the supervision of an
experienced pilot. The spinning rotor blades produce enormous forces. Make sure that no
children, animals or any other thing comes into the proximity of the helicopter, to avoid
personal injury or damage of property. Make sure while flying indoors that the room is big
enough. If you are flying outdoors make sure not to fly in windy conditions. The helicopter can
cope with a certain amount of wind, but it still requires pilot skill to fly in windy conditions. We
do not assume liability for any improper use of the product.
Caution! A helicopter consists of various parts which wear, such as gears, motors, bearings,
linkages etc. A continuous maintenance is necessary to ensure safe operation. Like on real
aircraft, a preflight check has to be performed to be able to find out problems prior to flight, so
that they could not become the reason for a crash.