Warranty and service
We guarantee this product to be free of manufacturing and assembly defects for a period of one year from the time of
purchase. The warranty only applies to material or operational defects, which are present at the time of purchase.
During that period, we will repair or replace free of service charge for products deemed defective due to those causes.
This warranty is not valid for any damage or subsequent damage arising as a result of misuse, modification or as a result
of failure to observe the procedures outlined in this manual.
The warranty service is valid in China only.
If you need warranty service overseas, please contact your dealer in the first instance, who is responsible for
processing guarantee claims overseas. Due to high shipping cost, complicated custom clearance procedures
to send back to China. Please understand SkyRC can't provide warranty service to overseas end user directly.
If you have any questions which are not mentioned in the manual, please feel free to send email to
[email protected]
Note:
1.
2.
3.
This charger is designed and approved exclusively for use with the types of battery stated in this Instruction
Manual. SkyRC accepts no liability of any kind if the charger is used for any purpose other than that stated.
We are unable to ensure that you follow the instructions supplied with the charger, and we have no control over
the methods you employ for using, operating and maintaining the device. For this reason we are obliged to deny
all liability for loss, damage or costs which are incurred due to the incompetent or incorrect use and operation of
our products, or which are connected with such operation in any way.Unless otherwise prescribed by law, our
obligation to pay compensation, regardless of the legal argument employed, is limited to the invoice value of
those SkyRC products which were immediately and directly involved in the event in which the damage occurred.
Liability exclusion
Manufactured
by
SKYRC
TECHNOLOGY
CO
.,
LTD
.
www
.
skyrc
.
com
RoHS
Electromagnetic Compatibility - Requirements for household appliances,
electric tools and similar apparatus - Part 1: Emission
Electromagnetic compatibility – Requirements for household appliances,
electric tools and similar apparatus – Part 2: Immunity Product Family Standard
Electromagnetic Compatibility (EMC) Part 3-2: Limits for harmonic current
emissions(Equipment input current up to and including 16A per phase)
Electromagnetic compatibility (EMC) - Part 3-3: Limitation of voltage
supply systems for equipment with rated current ≤16 A.
EN 55014-1:2006+
A1:2009+A2:2011
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
Test Standards
Title
Result
Conform
Conform
Conform
Conform
Conform
Conform
Conform
EN 60335-1: 2012
+A11: 2014
EN 60335-2-29:
2004+A2: 2010
EN 62233: 2008
Requirements for household appliances, electric tools and similar
apparatus - Safety - Part 1: General requirements
Requirements for household appliances, electric tools and similar apparatus -
Safety - Part 2-29: Particular requirements for battery chargers
Measurement methods for electromagnetic fields of household appliances and
similar apparatus with regard to human exposure
PC1260 satisfy all relevant and mandatory CE directives and FCC Part 15 Subpart B: 2016. For EC directives:
The product has been tested to meet the following technical standards:
CONFORMITY DECLARATION
This symbol means that you must dispose of electrical from the General household waste when it reaches the end of its useful life.
Take your charger to your local waste collection point or recycling centre. This applies to all countries of the European Union, and to
other European countries with a separate waste collection system.
-
7
-
-
8
-
During the charge process, a specific quantity of electrical energy is fed into the battery. The charge capacity is
calculated by multiplying charge current by charge time. The maximum permissible charge current varies
depending on the battery type or its performance, and can be found in the information provided by the battery
manufacturer. Only batteries that are expressly stated to be capable of quick-charge are allowed to be charged at
rates higher than the standard charge current.
Connect the battery to the terminal of the charger. Red is positive and black is negative. Due to the difference
between resistance of cable and connector, the charger cannot detect resistance of the battery pack. The
essential requirement for the charger to work properly is that the charge lead should be of adequate conductor
cross-section and that high quality connectors which are normally gold-plated should be fitted to both ends.
Always refer to the manual by the battery manufacturer about charging methods, recommended charging current
and charging time. Especially, the lithium battery should be charged strictly according to the charging instruction
provided by the manufacturer.
Special attention should be paid to the connection of lithium battery.
Do not attempt to disassemble the battery pack arbitrarily.
Be aware that lithium battery packs can be wired in parallel or in series. When the battery is connected in parallel,
its capacity is calculated by multiplying the single battery capacity by the number of cells with the total voltage
staying the same. Voltage imbalance may cause fire or explosion. Lithium battery is recommended for charging in
series.
The charger is not suitable for children under 14 years old. People with behavior disturbance, mental disorder or
no experience should use it under the supervision and guidance . Children are forbidden to play with it. They are
also NOT allowed to clean and maintain the device without the supervision.
If the power cord is damaged, please return it back to the factory, supplier or technicians for replacement for fear
of danger.
Charging
Please bear in mind the following points before beginning charging:
Did you select the appropriate program suitable for the type of battery you are charging?
Did you set up adequate current for charging?
Have you checked that all connections are firm and secure?
Make sure there are no intermittent contacts at any point in the circuit.
Never attempt to charge or discharge the following types of batteries
A battery pack which consists of different types of cells (including different manufacturers)
A battery already fully charged or just slightly discharged
Non-rechargeable batteries (Explosion hazard)
A battery requires a different charge technique
A faulty or damaged battery
A battery fitted with an integral charge circuit or a protection circuit.
Batteries installed in other devices or connected to other parts.
Batteries that are not expressly stated by the manufacturer to be suitable for the currents the charger delivers
during the charge process.
These warnings and safety notes are particularly important. Please follow the instructions for maximum safety.
Otherwise the charger and the battery can be damaged or at worst it can catch fire.
Never leave the charger unattended when it is connected to its power supply. If any malfunction is found,
TERMINATE THE PROCESS AT ONCE and refer to the operation manual.
Keep the charger well away from dust, moist, rain, heat, direct sunshine and vibration.
Never drop it.
The allowable AC input voltage is AC 100-240V.
This charger and the battery should be put on a heat-resistant, non-inflammable and non-conductive surface.
Never place them on a car seat, carpet or the like. Keep all the inflammable and volatile materials away from
the operating area.
Make sure you know the specifications of the battery to be charged or discharged to ensure it meets the
requirements of this charger. If the program is set up incorrectly, the battery and charger may be damaged. It
can cause fire or explosion due to overcharging.
WARNING AND SAFETY PRECAUTIONS
All specifications and datas are subject to change without notice.
7504-1058-01
