L i P o F A S T C H A R G E
1 2 . 0 A O F F - L I N E
SkyRC PC1260 is a dual channel LiPo battery charger, which is capable of balance charging 2 packs of 12 cell LiPo
batteries simultaneously. There are three working modes, fast charge, balance charge and storage.
PC1260 is easy to operate, and its Master-Slave mode can help avoid unnecessary settings. With this mode available,
pieces of PC1260 charger units are able to be connected and controlled for synchronous settings through data cables,
thus significantly saving time for setting. In addition, PC1260 has short-circuit, reverse polarity and over-heat
protection to ensure maximum safety.
Instruction Manual
INTRODUCTION
-
1
-
SK-100138
Power on: connect to the power source and turn on the power switch. A beep sound will be heard,
and the LCD screen will be displayed as below:
Battery connection: Please connect your batteries to PC1260 charger as below:
(Note: Be aware that the Lithium battery to be charged should be 12 cells. Make sure the battery
balance lead and charging lead are connected correspondingly to the charger)
1)
2)
OPERATION PROCEDURE
Battery Type(LiPo/LiHV)
Charging Current (1.0-12.0A)
Working modes (fast charge,
balance charge & storage)
Synchronous status
(Off-line, Master, Slave)
FEATURES
Support charging 2 packs of 12s LiPo batteries simultaneously
Support LiPo high voltage (LiHV) battery
Memorizing last charging current
Three working modes: fast charge, balance charge & storage
Mater-Slave mode available
Synchronize 2 or more chargers via data cable
Maximum safety: short circuit protection, reverse polarity protection
& over heat protection
-
2
-
Version: 1.0
Handle
LCD Display of Second Channel
LCD Display of First Channel
Balance Socket
XT90 Battery Port
Anti-Dust Air Intake
Control Button
Power Switch
PC Link
Data Link
AC Input 100V-240V
Cooling Fan
Dual Channel 12S LiPo Professional Balance Charger
Connect to the 12S battery balance board
Connect to the battery
12S LiPo
12S LiPo
SPECIFICATIONS
Adjustable charge current (1.0-12.0A)
2x16 LCD screen
Battery voltage meter
Battery internal resistance meter
Firmware upgrade via USB port
Input Voltage: 100-240V
Output Power: 1260W (630W*2)
Discharge Power: 100W (50W*2)
Charge Current: 1.0-12.0A*2
Balance Current: 1.5A
Battery Type: LiPo/LiHV
Battery Cell: 12S*2
Working Mode: Fast charge / Balance charge / Storage
Size: 272*202*118.6mm
Weight: 4.88kg
