background image

Table of Contents

WARNING:

Introduction
Special Features
Warning and Safety Notes  
Program Flow Chart
Explanation of Buttons
Power and Battery Connection
Charge Operation
Lithium Battery Program

 (LiPo/LiFe/Lilon/LiHV)

NiMH/NiCd Battery Program
Pb Lead-acid Battery Program
DJI Battery Program
DC/DC Converter
Battery Memory Set and Call Out
System Setting
Battery Voltage Meter
Battery Resistance Meter
Warning and Error Message
The

 

Set

 

Contains

Specification
Conformity Declaration
Regulatory Information
Commonly Used Terms
Warranty and Service

01
03
05
08
10
11
13
14
17
22
26
28
29
31
33
34
35
36
37
38
39
40
41

SkyRC  B6  V2  is  a  high-performance,  micro  processor  control 
charge/discharge  with battery management suitable for use with 
all  current  battery  types(LiPo/LiFe/Li-Ion/LiHV/NiMH/NiCd/Pb) 
batteries.The  charger  deliver  dedicated  60W  integrated  power 
and  can  fill  battery  at  up  to  6A.  Except  SkyRC  normal  charging 
programs, it is versatile with the addition of AGM and Cold modes 
for

 

Lead

 

Acid(Pb

battery

.

This charger can be powered by 11-18V DC, it is able to power 
DC equipment such as LED pit light, motor checker, etc.

Please BE SURE to read these INSTRUCTIONS, WARNING and 
SAFETY  NOTES  before  you  use  the  charger  for  the  first  time.It 
can  be  dangerous  to  mis-handle  batteries  and  battery  chargers, 
as there is always a risk of batteries catching fire and exploding.

Mishandling batteries and battery 
chargers is extremely dangerous, 
which may cause fire and explosion.

Introduction

01 ·

B6 V2

Never leave the charger unattended
when charging the battery.
LiPo batteries pose a severe risk of
fire if not properly handled.

Congratulations on your choice of SKYRC B6 V2 DC Balance 
Charger/Discharger. This unit is simple to use, but the operation of 
a sophisticated automatic charger such as SKYRC B6 V2 does 
require some knowledge on the part of the user. These operating 
instructions are designed to ensure that you quickly become 
familiar with its functions. It is therefore important that you read 
right through the Operating Instructions, Warning and Safety 
Notes before you attempt to use your new charger for the first 
time. We hope you have many years of pleasure and success with 
your new battery charger.

Summary of Contents for IMAX B6 V2























Reviews: