Pb Lead-acid Battery Program
Press the START button again and the nominal battery pack
voltage will begin flashing. Use the INC or DEC button to set
the voltage and the number of cells.
Press and hold the START button for 3 seconds to start
charging.
Once charging has commenced, the charger will display the
following real-time information: battery type, charging
current, battery voltage, working mode
,
elapsed time and
charged capacity.
When charging is complete, the screen will read “FINISHED”
and the charger will emit a ringing sound.
Pb Charge
1.5A 12.0V(6P)
P-6 1.5A 13.56V
CHG 002:22 00106
Pb AGM CHARGE
Mode:
After selecting the correct battery type, use the INC or DEC button to change it to the
“AGM CHARGE“ mode.
Press the START button and the amp rate value will begin flashing. Use the INC or
DEC buttons to adjust the value to the desired charge rate. The amp rate should be
set to 1/10th of capacity. For example, if you are charging a 20Ah battery the charge
rate should be set to 2A. Follow the instructions provided on your battery when
setting the amp rate.
Press the START button again and the nominal battery pack
voltage will begin flashing. Use the INC or DEC button to set
the voltage and the number of cells.
Press and hold the START button for 3 seconds to start
charging.
Once charging has commenced, the charger will display the
following real-time information: battery type, charging
current, battery voltage, working mode
,
elapsed time and
charged capacity.
When charging is complete, the screen will read “FINISHED”
and the charger will emit a ringing sound.
Pb
AGM
CHG
1.5A 12.0V(6P)
P-6 1.5A 13.56V
CHG 002:22 00106
Pb Cold CHARGE Mode:
Press the START button again and the nominal battery pack
voltage will begin flashing. Use the INC or DEC button to set
the voltage and the number of cells.
Press and hold the START button for 3 seconds to start
charging.
Pb
COLD
CHG
1.5A 12.0V(6P)
21 ·
e680
