SkyPilot SkyAccess DualBand, Installation Manual

Page: 31 / 41

SkyPilot SkyAccess DualBand Installation 31
Acc ess i ng Sk yAcces s D ua l Ban d
C om m an d-L i ne In ter fa ces
This appendix describes how to access the command-line interfaces that
SkyPilot SkyAccess DualBand provides for provisioning and
troubleshooting. You can connect to two different interfaces on the
SkyAccess DualBand: an interface with the device that operates as a
node on the wireless mesh network, and a separate interface with the
access point that extends Wi-Fi connectivity to subscribers.
(
You can connect to a SkyAccess DualBand and access the command-
line interface through Telnet over an Ethernet connection. After logging in
(by supplying a password), you can enter commands at the command
prompt.
1
? #
) ",
2
) ) ),
Open the network settings panel and assign the computer the IP
address 192.168.0.3 with a subnet mask of 255.255.255.0.
3
% ) #
) " = ) #
>,
4
,
A