SP9600 User Manual
20
5.2
Set User Password
Command:
UPW command is used to set user command password. User0‟s factory default
password is “1234”. User1‟s factory default password is “1234”. Changing the factory
password upon first use is highly suggested.
Command format:
1.Set user0 password:
< User0 Password>,UPW0;<New Password>
2.Set user1 password:
< User1 Password>,UPW1;< New Password>
Parameter description:
< New Password>:Fix 4 digits, range is “0000 to 9999”
Example:
Set user0 password
1234,UPW0;5678
5.3
Set ACK
Command:
ACK command is used to set up UDP response mechanism switch Command format:
Disable UDP response: ACK;0
Data packing method is the same as before Enable UDP response: ACK;1
Data packing includes sequence number and ID Parameter description:
This function needs SVR command set as UDP mode to open a response.
Example:
Enable UDP mode and open a response
SVR;183.233.129.45;;6667;1;1
Enable new respond mechanism ACK;1
Configure the initial waiting reply time SVT;1800;15
