+
Safety Precaution
This STB has been designed and manufactured to satisfy the international
safety standards. Please read the following safety precautions carefully
before operating this receiver.
4
Main Supply:
Before operating, please check the units operating voltage is 90~240V AC
50/60Hz.
4
Overload:
Do not overload a wall outlet, extension cord or adapter, neither use
damaged
power cord or touch it with wet hand as this may result in electric shock.
4
Liquid:
The receiver shall not be exposed to dripping or splashing water, and that no
objects filled with liquids, such as base, shall be placed on the apparatus.
4
Ventilation:
Keep the slots on top of the receiver uncover to allow sufficient airflow to the
unit. Do not put the receiver on soft furnishings or carpets.Do not expose the
receiver to direct light or do not place it near a heater or in humid conditions.
Do not stack other electronic equipments on top of the receiver.
4
Cleaning:
Plug out the receiver from the wall outlet before cleaning. Clean the receiver
by a soft cloth or mild solution of washing-up liquid (no solvents).
4
Connection:
Disconnect the receiver from the mains when you connect it to satellite LNB
or disconnet it from LNB. Failure would possibily cause damage to the LNB.
4
Location:
Put the receiver indoor in order to avoid lightening, raining or sunlight.
4
Uncover:
Do not remove the cover, to reduce the risk of electric shock.Contact qualified
and licensed service personnel to repair the receiver, or contact your dealer.
Safety Precaution
@ 2