Shaft body of motor unfolding/folding function
folding diagram
Press on the button of quadcopter's bottom,in the meantime move the
shaft body, then it can unfold/fold.
Install landing skids & propeller protecting frame
1.lnstall the
stand in the
stand slot.
2.lnstall the
protective housing
in the motor shaft
and then install
the bolts
Note: The material of leaf protective housing is soft for the safety, which
may easily distort and the leaf may scratch the protective housing,
under this condition, please open the protective housing till it is not
scratched by the leaf.
Preparation for flight
Step1: Open the battery
cover and insert the
battery into power port.
Step2:Press the aircraft
switch for onesecond,turn
on power switch.
"'1
I
Step 3: Press the ON/OFF
power switch up.
Step4:When the LED indicator on the quadcopter stops
flashing and stays constant, this indicates that the
quadcopter was paired successfully with the remote
control.
NB: (1 )To pair the quadcopter with the remote control, turn on the
quadcopter and the remote control, then wait for the LED
indicator on the quadcopter to stopflashing and stay constant.
(2) Please pair the frequency within Sm to the aircraft for avoiding
interference from other signals.
(3)When connecting the battery terminal with the power plug of the
aircraft, avoid reversely connecting the positive and negative poles.