Skymsen PAIE, Instruction Manual

Page: 8 / 14

06
Table - 03
Product Kind of Cut Discs
Beet Slices E1, E3, E5 e E10
Scallop Cut W2, W4
Dices E10 + GRADE CUBO
Shredder Z3, Z5 e Z8
Crimping Slices H2,5, H3, H7, EH3, EH7
Carrots Slices E1, E3, E5 e E10
Scallop Cut W2, W4
Dices E10 + GRADE CUBO
Shredder Z3, Z5 e Z8
Crimping slices H3, H7, EH3, EH7
Grater V
Cabbage Strips E1, E3, E5 e E10
Shredder Z3, Z5 e Z8
Mushroom Slices E1, E3, E5
Dices E10 + GRADE CUBO
Onion E1, E3, E5, e E10
E10 + GRADE CUBO
Pepper E1, E3, E5, e E10
Radish E1, E3, e E5
Scallop Cut W2, W4
Shredder Z3, Z5 e Z8
Crimping Slices H3, H7, EH3, EH7
Leaves (*) Strips EH3 , EH7
Potatoes Slices - Chip's E1, E3 e E5
French Fry E10 + GRADE PALITO
Dices E10, GRADE CUBO
Shredder Z3, Z5 e Z8
Crimping Slices - Juliene H3, H7, EH3, EH7
Scallop Cut W2, W4
Bananas E3 e E5
Oranges E5 e E10
Apples Slices E1, E3 e E5
Papayas Dices E10 + GRADE CUBO
Coco Nut Sherdder Z3, Z5 e Z8
Grater V
Selecting Products Cuts Table
(*) Only some kind of leaves. Consult your Dealer.
Table 03 , Selecting Products Cuts , give the list of discs and grilles and their
combinations to be selected to obtain many cuts .
IMPORTANT
The Selecting Products Cuts Table aim is to suggest some kind of cuts to be
used with some product. The result of the cuts depends on the condition,
the type and the quality of the processed product .
Slices
Slices
Slices
Dices
Slices
Slices
19
Problems Causes Solutions
Irregula Cuts
* Disc or Feeding procedure
do not follow chapter 2
recommendations.
* Refer to charter 2 and
follow the instructions
Table - 04
4.6 Maintenance
4.6.1 Danger
Any maintenance with the machine in working situation is dangerous. TURN IT
OFF BY PULLING THE PLUG OFF THE SOCKET DURING MAINTENANCE.
IMPORTANT
Pull the plug off its socket when any emergency arises .
4.6.2 Advice
Electrical or mechanical maintenance has to be undertaken by qualified
personal. Person in charge has to be sure that the machine is under TOTAL SAFETY
conditions when working .
5 Analysis and Problems Solving
5.1 Problem, causes and solutions
The Food Processor Model PAIE were designed to operate with the need of
minimum maintenance but the natural wearing caused by long use of the equipment
may occasionally cause some malfunctions.
If such problem occurs with your processor refer to Table 04 in which the most
common situations are listed with recommended solutions.