Skymsen BPS-30CE User Manual Download Page 3

01

1. Introduction:

 

1.1 Safety

 
When  not  properly  used  the  Planetary  Mixer  is  potentially  dangerous  machine. 
Maintenance, cleaning or any other operation shall be made by trained people. Plug has to 
be off the outlet during any of these operations.

Remove plug from outlet when you wish to remove any removable part during cleaning, 
maintenance or any other operation.

Never make use of any  tool or instrument that is not originally part of the machine for any 
operation. Be sure that removable parts are properly attached to its correct position.

Never throw water directly on the machine.

Keep hands off turning parts.

DO NOT operate the machine wearing wet clothes or wet shoes.

Be sure the machine is grounded.
 
Operator has to tie his/her hair up before starting the operation.

Keep this manual and have it handy for use any time.

 

 

1.2 Main Components:

 
All components that are part of the machine were designed and made to its proper function 
according to pattern tests and experience of Siemsen. The new concept of the steel plate 
used in this machine makes it  a sanitary safe and clean machine.         
 

Summary of Contents for BPS-30CE









Reviews: